ASHOKA WOMEN’S ENGINEERING COLLEGE

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

  1. ABOUT ECE DEPARTMENT

 Electronics and Communication domain conceptualize research, design, develop and test electronic equipments, communications and broadcast systems. ECE is the application of science and mathematics to practical problems in the field of electronics and communications. The Department Of Electronics & Communication Engineering (ECE) has consistently maintained an exemplary academic record. The greatest asset of the department is its highly motivated and learned faculty members. The available diversity of expertise of the faculty prepares the students to work in global multicultural environment. The College offers UG Course ECE and PG Course Digital Electronics and communication system (DECS).

We transform students into a core ECE engineer, they can work in the positions of Design engineer, ASIC Engineer trainee, Embedded Engineer or Network Support Engineer in various domains like Circuit Design, Wireless Communications, Robotics, VLSI, Nano Technology, Embedded Systems, Optical Communications, Signal Processing, Control System, Analog Electronics and Networking. The Department will continue to deliver our best to serve the society and mankind. It is also expected that our students will continue to transfer the skills which they have developed at this department to build a better society through their innovations. The department focuses its research on Image processing, Communication, Microwave Engineering, VLSI & Embedded Systems etc.

  1. VISION AND MISSION

VISION

ECE department envisions developing innovative, ethical electronics professionals through excellence in teaching and training, technically competent women engineers who can address the growing challenges in the modern world with a keen sense of social responsibility.

MISSION

  • To impart high quality technical education that can turn students into high performing engineers.
  • To provide opportunities for students to work on the different kinds of hardware and software platforms prevalent in industry.
  • To provide training for student’s professional career growth with Values and Ethics.
  1. PEO’s
  • PEO-I: Graduates shall have strong foundation in Electronics and Communication Engineering along with advance knowledge on contemporary technologies.
  • PEO II: Graduates will shoulder responsibilities in their chosen careers including supportive and roles in multidisciplinary teams.
  • PEO III: Graduates shall exhibit professional and ethical attitudes with continuous enhancement of technical expertise for solving engineering issues in broader social context.
  1. LABORATORY DETAILS

a.Digital and Linear Integrated Circuits Lab

Digital and Linear Integrated Circuits Lab is very important for designing the characteristics of OP-AMP, 555 Timer IC and to simulate the applications of OP-AMP. It is also used for designing the digital circuits. Students of various branches design and test their circuits as part of their curriculum. Guidance is provided to the students by a team of expert faculty and lab technicians. The labs are kept open after the college hours to enable the students to engage themselves in designing /testing the circuits in their leisure hours.

b.Electronic Devices and Circuits Lab

Electronic Devices and Circuits laboratory is well equipped with the latest signal generators, oscilloscopes, digital trainer kits and measuring instruments. Students of various branches design and test their analog /digital/mixed signals, digital circuits as part of their curriculum. Guidance is provided to the students by a team of expert faculty and lab technicians. Electronic Devices and Circuits Laboratory equipped with wide range of advanced components that covers practical oriented electronic circuits that are very essential for the students to solidify their theoretical concepts. This laboratory provides a communication bridge between the theory and practical world of the electronic circuits.

c.Microwave and Optical Communication lab

In Microwave Lab the students are exposed to the microwave active devices like klystron, Gunn diode and passive devices isolator, circulator, slide screw tunner, magic tee, directional coupler, horn antenna, attenuator, terminations. The students perform all the experiments as prescribed by the university. The optical lab is equipped with fiber optic trainer kits and modules to enable the study of components of an optical communication system. The students perform experiments to study the characteristics of optical sources (LED & LD) and optical detectors (LD & APD) and optical fibers. Fault detection in a fiber link is studied using the OTDR module. A FSO module enables study of Transmission of optical signal in free space.

d.VLSI and DSP lab

The Digital Signal Processing and VLSI applications are becoming more prevalent in everyday use. The field of DSP/VLSI was developed due to the flexibility offered by the use of digital computers in implementing signal processing algorithms and systems. There is a constant need for designing systems with lower power, higher speed and lower area. The DSP/VLSI lab is equipped with hordes of personal computers. The students enrich their knowledge by using the software tools like MATLAB, Modelsim, xilinx, HDL Designer Pro Tanner and Code Composer Studio to perform embedded based experiments.

e.Microprocessor and Microcontroller lab

Microprocessor lab helps the students enhance their knowledge about various processors such as 8085, 8086, micro-controllers, Pentium processors and also the interfacing of these processors with other equipments. Students from other branch of engineering and sciences also come to this lab and develop their skills in the field of microprocessor and its applications. The features and facilities available in this lab will help the students do their projects and enhance their knowledge about the latest trends and technologies.

f.Analog and Digital Communication lab

The students perform the characteristics of microphone and gain knowledge in Acoustical Engineering. They also test condenser, coil and piezo-electric transducers used in the audio engineering. In the area of pulse techniques, faculty help them in PAM and PWM experiments. In addition to all the above, the lab consists of the fiber optic trainer, analog signal sampling kit, TDM trainer and microwave test benches.

5.FACULTY LIST

S.No. Name of the faculty Designation
1. Dr. R.Naveen Professor & Principal
2. Dr Siva Kumar S A Professor & HOD
3. K Prasad Babu Associate Professor
4. E Bhagya Lakshmi Associate Professor
5. C Saranya Associate Professor
6. B Naga Rajesh Assistant Professor
7. N Vinod Kumar Assistant Professor
8. Alluru Sreevani Assistant Professor
9. M.Sameena Nazeer Assistant Professor
10. Syed Noorullah Assistant Professor
11. C Padma Assistant Professor
12. S.Pushpalatha Assistant Professor
13. Mrs.Radhika Assistant Professor
14. Ms.Sai Archana Assistant Professor
15. Ms.Jabin Begum Assistant Professor
13. G.Vimala Assistant Professor

 

6.FACULTY PUBLICATION

  • R.Naveen & Dr.S.A.Sivakumar published paper in SCOPUS-IJEAT on “Diabetic Retinopathy Detection using Image Processing” Volume-8, Issue-6S August 2019 P.No: 937-941.
  • N.Vinod Kumar, Mr.K.Prasad babu published paper in SCOPUS-IJRTE on “Internet of Vehicles for traffic management” Volume-8, Issue-4 November 2019

P.No: 12230-12232.

  • N.Vinod Kumar, Mr.K.Prasad babu published paper in UGC-IJISET on “Implementation of BCD adder using Clock Gating” Volume-6, Issue-10 October 2019

P.No: 267-272.

  • K.Prasad babu, Mr.B.Naga Rajesh published paper in UGC-JETIR on “FPGA Implementation of pipelined 16 bit RISC processor with floating point unit” Volume-6, Issue-6 June 2019.
  • B.Naga Rajesh , published paper in UGC-IJMTE on “A novel approach of CNN based image denoising with fast and flexible discriminative solution” Volume-9, Issue-6 June 2019.
  • S. A. SivaKumar, Dr. R. Naveen, B.Naga Rajesh published paper titled “Electronic currency note sterilizer machine”, Materials Today Proceedings, https://doi.org/10.1016/j.matpr.2020.07.064. – ELSEVIER PUBLICATION
  • S. A. Sivakumar, published paper titled “A stochastic model for secured online transaction using Monty Hall problem”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.07.065ELSEVIER PUBLICATION
  • S.A.Sivakumar, published paper titled “Comparitive Analysis of Shift Register Designs For Successive Approximation Analog To Digital Converters ”, IJAST, vol. 29, no. 8s, pp. 2254 – 2260, May 2020.

7.FACULTY ACHIEVEMENTS

  • R.Naveen, Dr.S.A.Sivakumar, B.Naga Rajesh Indian Patent No. 202041000595 filed and published in official patent journal of India

Title: “Smart Quality Check For Multiple Products Using Single OTG Device”

  • R.Naveen, Dr.S.A.Sivakumar Indian Patent No. 202041009984 filed and published in official patent journal of India

Title: “Techno Afforestation System”

  • R.Naveen, Dr.S.A.Sivakumar Indian Patent No. 202041015043 filed and published in official patent journal of India

Title: “Electronic Currency Note Sterilizer Machine”

  • S.A.Siva Kumar, B.Naga Rajesh, K.Prasad babu, M.Pushpalatha, Sreevani and G.Vimala participated in one month online FDP on Data Science conducted by APSSDC, AP
  • S.A.Siva Kumar ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Naga Rajesh ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • R.Merlin,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Sravani ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Padma ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Pushapalatha,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Vimala ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Sreevani ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • Syed Noorullah ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • K.Abdul Rahman ,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • sazia Athar,Completed online FDP certificate held on July to October 2019 conducted by SWAYAM ONLINE PORTAL_AICTE,NPTEL.
  • R.NAVEEN,has attended 2 Weeks AICTE Sponsored by FDP on” Cyber Security “held on 11th November,2019 to 23rd November,2019 at KSRM-KADAPA.
  • S.A.Siva Kumar, has attended 2 Weeks AICTE Sponsored by FDP on” Cyber Security “held on 11th November,2019 to 23rd November,2019 at KSRM-KADAPA.
  • Naga Rajesh , has attended 2 Weeks AICTE Sponsored by FDP on” Cyber Security “held on 11th November,2019 to 23rd November,2019 at KSRM-KADAPA.
  • David Pranay, has attended 2 Weeks AICTE Sponsored by FDP on” Cyber Security “held on 11th November,2019 to 23rd November,2019 at KSRM-KADAPA.
  • Pushapalatha, has attended one week AICTE sponsored STTP on “Embedded systems &Internet Of Things” held on 23th November,2019 to 30th NOVEMBER at GNITS-Hyderabad.
  • A.Sreevani, has attended one week AICTE sponsored STTP on “Embedded systems &Internet Of Things” held on 23th November,2019 to 30th NOVEMBER at GNITS-Hyderabad.
  • Vimala, has attended one week AICTE sponsored STTP on “Embedded systems &Internet Of Things” held on 23th November,2019 to 30th NOVEMBER at GNITS-Hyderabad.
  • Vinod kumar ,had attended one week faculty development program “Internet of Things” held on 17th to 22nd  June 2019 at G.Pullaiah college of engineering and technology, Kurnool, organized by  E&ICT Academy,NIT WARANGAL,GPCET.
  • R.Merlin, has attended 2 days FDP on “the art of writing projects proposals and IPR innovations” held on 17th June 2019 to 18th June 2019 at Santhiram Engineering College –Nandyal.
  • B.Naga Rajesh, has attended 2 days FDP on “the art of writing projects proposals and IPR innovations” held on 17th June 2019 to 18th June 2019 at Santhiram Engineering College –Nandyal.
  • B.Naga Rajesh, has attended one week FDP on “Problem Solving and Artificial Intelligence” held on 10th June 2019 to 15th June 2019 at RGM–Nandyal.
  • Naga Rajesh, has attended one day project based training program on “MECHATRONICS BOOTCAMP” held on 7th May,2019 at Dr K.V Subbareddy college of engineering for women, Kurnool.
  • Naga Rajesh , has attended one day workshop on “INTELLECTUAL PROPERTY RIGHTS AND PATENTS” held on 30th March, 2019 at SV College of Engineering, Tirupati.
  • Naga Rajesh ,has attended two day faculty development program “THE ART OF WRITING PROJECT PROPOSALS AND IPR INNOVATIONS” held on 17th and 18th June 2019 at Shanthiram Engineering College , Nandyal.
  • Prasad Babu, has attended one day project based training program on “MECHATRONICS BOOTCAMP” held on 7th May,2019 at Dr K.V Subbareddy college of engineering for women, Kurnool.
  • Prasad Babu ,Completed online FDP on “CMOS DIGITAL VLSI DESIGN” conducted by NPTEL.
  • Abdul Rahman, has attended one day project based training program on “MECHATRONICS BOOTCAMP” held on 7th May,2019 at Dr K.V Subbareddy college of engineering for women, Kurnool.
  • Merlin, has completed online FDP on “CMOS DIGITAL VLSI DESIGN” conducted by NPTEL.
  • Feroz shah Ahmed, has attended event on “NIDays” on 25th October 2018 at ITC Gardenia, Banglore.
  • Sravani, has completed online FDP on “CMOS DIGITAL VLSI DESIGN” conducted by NPTEL.
  • Vinod Kumar, has completed online FDP on “INTRODUCTION TO INTERNET OF THINGS” conducted by NPTEL.
  • Vinod Kumar, has attended one day project based training program on “MECHATRONICS BOOTCAMP” held on 7th May,2019 at Dr K.V Subbareddy college of engineering for women, Kurnool.
  • Vinod kumar ,had attended one week faculty development program “Internet of Things” held on 17th to 22nd  June 2019 at G.Pullaiah college of engineering and technology, Kurnool, organized by  E&ICT Academy,NIT WARANGAL,GPCET.

8.STUDENT ACHIEVEMENTS

  • Seven Students from ECE participated in Zonal level APSSDC State-skills competition held at G.Pulla Reddy College of Engineering, Kurnool. Among them, Maahirah of III-ECE A shortlisted to represent our state in National level skill competition under trade skill ‘Electronics’.
  • 10 II Year ECE Students attended workshop at NIT WARANGAL – TECHNICAL FEST from 1st November 2019 to 3rd November 2019.
  • 10 II Year ECE Students attended workshop-IOT with Rasberry Pi at Sree Vidya Niketan – MOHANA MANTRA from 27th September 2019 to 29th September 2019 and won prizes.
  • 08 III Year ECE Students attended workshop- IOT with Rasberry Pi at Sree Vidya Niketan – MOHANA MANTRA from 1st November 2019 to 3rd  November 2019
  • 06 IV Year ECE Students attended workshop at NIT WARANGAL – TECHNICAL FEST from 1st November 2019 to 3rd  November 2019
  • 04 IV Year ECE Students attended workshop-IOT with Rasberry Pi at Sree Vidya Niketan – MOHANA MANTRA from 27th September 2019 to 29th September 2019.
  • 06 IV Year ECE Students attended various events at symposium conducted at Pulliah Engineering College and won various prizes.
  • 19 of IV ECE students got UDEMY and Elsevier certification
  • Fareeda, participated in HACKATHON event conducted by ORL Industries at E-MERGE’19, A National level students technical symposium organized by department of ECE and TEQIP –III during 16-18 March ,2019 in JNTUA, ANATHAPURAMU.
  • Fareeda, participated in PAPER PRESENTATION EVENT at E-MERGE’19, A National level students technical symposium organized by department of ECE and TEQIP –III during 16-18 March ,2019 in JNTUA, ANATHAPURAMU.
  • Niharika, participated in PAPER PRESENTATION EVENT at ECLATECS-2K19, a national level technical symposium organized by department of ECE,JNTUA College of engineering ,kalikiri during 20-21 february,2019.
  • Priyanka, participated in PAPER PRESENTATION EVENT at ECLATECS-2K19, a national level technical symposium organized by department of ECE,JNTUA College of engineering ,kalikiri during 20-21 february,2019.
  • Sai Bhargavi, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Supraja, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Vasantha, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Fareeda, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Mounika, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Sireesha, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Shivani, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Latha, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Gayathri, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Preethi, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • A.Vyshnavi bai, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Yasmeen, attended a two day national level workshop on “ROBOTICS” during 20-21 february,2019.
  • Anusha, participated in 2-day bootcamp on” Artificial intelligence with IBM Watson” organized during 22nd to 23rd February,2019 at department of biomedical engineering, university college of engineering(A),Osmania university.
  • Sireesha, participated in 2-day bootcamp on” Artificial intelligence with IBM Watson” organized during 22nd to 23rd February,2019 at department of biomedical engineering, university college of engineering(A),Osmania university.
  • Anusha, participated in National level students paper presentation”Technobrain 2K19” organized during 30th March, 2019 at ST Johns college of Engineering & Technology.

9.INDUSTRIAL VISITS

  • Industrial Visit All India Radio(AIR), KURNOOL

Date Of Visit:  23/10/2019

  • Industrial Visit ISRO, SRIHARIKOTA

Date Of Visit:  20/02/2020

  • Industrial Visit DOORDHARSHAN, KURNOOL

Date Of Visit:  29/1/2020

10.MoU SIGNED

      a.SMART BRIDGE – HYDERABAD

       b.INNOVATIVE EMBEDDED RESEARCH CENTRE – HYDERABAD

11.Internship:

C.Keerthi reddy of IV ECE attended internship at Smart Bridge – Hydrebad

ASHOKA WOMEN’S ENGINEERING COLLEGE

  1. ABOUT EEE:

Department of Electrical & Electronics engineering is started in the year 2008 with a present intake of 60. The department is heading with an objective to develop industry ready engineers while meeting local industry needs. The department is an integral part of Ashoka Women’s Engineering College, Kurnool. Since inception the department has well experienced and committed faculty, who continuously strive for the benefit of the students and their career development. The strength of the department is its laboratory facilities besides good infrastructure. Faculty of the department continuously encourage/drive students to involve in industrial visits, internships and also provides various training programs to enhance the technical skills of the students. The Department is offering one Post Graduate Program with the specialization in Electrical Power Systems with an intake of 18.Active research is going on Power Systems, Power Electronics & Drives and Dynamic Control Systems.

  1. VISION:

To empower the girl students with the contemporary knowledge in Electrical and Electronics Engineering in order to make them competent and developing capabilities to adapt for new challenges.

MISSION:

The Department of Electrical and Electronics Engineering of ASHOKA WOMENS ENGINEERING COLLEGE in tune with its vision would offer under-graduate program in engineering to prepare students for a successful career as Electrical Engineering Professional in a very dynamically changing industry by:

  • To impart quality education that enables building up of successful careers and to motivate the pursuit of higher studies.
  • Inculcating strong mathematical & computing fundamentals among students that form the baseline for Electrical Engineering solutions.
  • Inculcating among its students the need for continuous learning and the skills necessary to continue their education, develop professionally and push the boundaries of knowledge long after their graduation.
  • Providing a stimulating environment for faculty & students alike that fosters a culture of knowledge seeking and sharing & appreciation of intellect helping all involved to grow both as individuals and as Electrical Engineering professionals.
  • Integrating with the opportunities for teamwork, leadership, values, ethics and social activities.
  • To provide insight to the present day cutting edge technologies.
  • To provide an intellectually stimulating and congenial atmosphere for exploring new ideas in multidisciplinary fields to excel in academics and co-curricular activities.
  1. PROGRAM EDUCATIONAL OBJECTIVES (PEO’s) – B.TECH (EEE)

PEO1: To provide students with a solid foundation in mathematical, scientific and electrical engineering fundamentals required to solve problems related to Electrical and Electronics Engineering and to prepare the students for post-graduate programs. 

PEO2: To excel in the chosen career and to develop the society through the knowledge and skills acquired. 

PEO3:  To inculcate professional and ethical attitude, effective communication skills, team spirit, leadership and multidisciplinary approach.

PROGRAM EDUCATIONAL OBJECTIVES (PEO’s) – M.TECH (EPS)

PEO1: To excel in the chosen career to be taken up in R&D Organizations / Higher Educational Institutions / relevant industries in the area of “Electrical Power Systems”.

PEO2: To serve and develop the Society through the knowledge and skills acquired

PEO3: To work effectively as an individual and as a team member in the field of career chosen

PEO4: Efforts put forth for continuous up gradation of knowledge and personal skills.

  1. LAB NAMES & DESCRIPTION:
S. No Name of the Laboratory Description
1 Electrical Machines Laboratory  This is the main lab where experiments like load test on various machines, speed control tests, open circuit tests, short circuit tests, etc. are carried out. And also wide varieties of practical experiments are performed here with combination of different rotating machines. The laboratory is also used for research activities in machines and to carry out project works on energy conversion.
2 Power electronics Laboratory The power electronics lab enhances the EEE students by providing them the better understanding of the concepts and working of advanced power semiconductor devices and power electronics circuits.
3 Control systems Laboratory  The Control Systems Lab in the Department of Engineering Technology contains a variety of laboratory equipment used in design and experimentation of digital and analog electromechanical feedback control systems.
4 Electrical circuits Laboratory  The objective of the Electrical Circuits lab is to expose the students to the electrical circuits and give them experimental skill.
5 Network Analysis Laboratory The network analysis lab is a very basic skill set needed by all who want to do major in Electronics, instrumentation or electrical engineering. This Lab aims at equipping students with the analysis and techniques, which will be used throughout the engineering curriculum.
6 Electrical Measurements Laboratory Measurement of different electrical and electronic parameters such as voltage, current, power, energy, resistance, inductance, capacitance etc. are performed in Electrical and Electronic Measurement laboratory. … Measurement of current and voltage using instrument transformer is an important feature of this laboratory.
7 Power Systems & simulation laboratory thas lab is able to ensure the testing and verification of automation and relay protection algorithms, software and hardware, can serve as the basis to get for students practical skills which is necessary for the development and operation of power automation systems.
8 Electrical Power Systems Lab Power system Laboratory comprises of protection, simulation, high voltage and machine related experiments. Facilities are available for overcurrent, undervoltege, directional, differential and distance relays including different numerical relays.

 

5.FACULTY LIST:

S.NO NAME OF THE FACULTY DESIGNATION QUALIFICATION
1 Mr K RAJESH Assistant Professor M.Tech
2 Mrs V SOWMYA SREE Assistant Professor M.Tech (PH.D)
3 Mrs G PAVANA JYOTHI Assistant Professor M.Tech
4 Ms N DEEPTHI Assistant Professor M.Tech
5 Mr P VISWANATH REDDY Assistant Professor M.Tech
6 Ms S FARZANA Assistant Professor M.Tech
7 Mr Y CHINTU SAGAR Assistant Professor M.Tech
8 Ms K UDAYA KUMARI Assistant Professor(H&S) M.SC (B.Ed)

 

6.STUDENTS ACHIVEMENTS:

  • Suvarna of IV EEE has been selected as “Electrical Engineer” (Designation), in Bajaj Electrical Pvt Ltd in a Campus Placement drive held at Hyderabad.
  • Madhuri Reddy of II EEE attended a Technical fest of “TECHNOZION” held at NIT, Warangal during 1st – 2nd November 2019.
  • Renuka, C.Harika and C.B. Sureka (II EEE) have been selected for 20-day Internship Training at APSPDCL, Kurnool.
  • Kalpana, V.Thanusha, L.Chandana (II EEE) have participated in Paper Presentation in a Two-day National Level Technical Student’s Symposium “amp -2k19” organised by the Department of EEE, Sri Krishnadevaraya University, College of Engineering and Technology, Ananthapuramu on 26th and 27th February, 2019.
  • Bindu and V.Nandini (II EEE) have participated in Project Expo and secured II Prize in a National Level Tech Fest organised by the Department of EEE, SVR Engineering College, Nandyal on 15th and 16th March, 2019.
  • Sai Prathyusya (II EEE) has participated in Project Expo in a National Level Tech Fest organised by the Department of EEE, SVR Engineering College, Nandyal on 15th and 16th March, 2019.
  • B Nandini of IV-EEE had selected in TCS on Campus Placement Drive.
  • B Bhargavi of IV-EEE had selected in Glenwood Technologies, Chennai in Campus Placement Drive.
  • M Vasantha kumari, Ms. S Narasamma, N Lawanya and Ms. S Nazeeya Begum of IV-EEE are selected in Repherrals Software solutions Pvt. Ltd in Campus Placement Drive.

7.FACULTY PUBLICATIONS:

Name of the Faculty Name of the Journal with ISSN Title of the Published Journal
K RAJESH IJEE-ISSN:0974-2158
(SCOPUS)
Design and Analysis for various controlling methods of a Z-Source Inverter
IJRTE-ISSN:2277-3878
(SCOPUS)
Design and Simulation Analysis of 12.4KWP grid connected photovoltaic system by using PVSYST software
TEST-ISSN:0193-4120
(SCOPUS)
Analysis of single phase ZSI with various loads
IJCSIT-ISSN:2277-4408
(UGC)
Analysis of Hybrid filter for symphonic mitigation and reactive power support
IJCRT-ISSN:2320-2882
(UGC)
A Cascaded H-Bridge MLI Fed Motor By using Fuzzy-MPPT PV System
Mrs V SOWMYA SREE TMP-ISSN:0193-4120
(SCOPUS)
MLI for V/f Drive
ICGPTPG-ISSN: 0193-4120
(CONFERENCE)
International Conference on Green Power Technology in Power Grid : Issues, Challenges & Control (ICGPTPG-2019)
IJECEC-ISSN : 2722-2578
(SCOPUS)
Grid-Connected Dual Voltage Source Inverter for Power Quality Improvement in Distribution System
ICAESM-ISBN: 978-1-4673-0213-5
(IEEE-CONFERENCE)
Look-up table with classical 6-sector division and reduction of common mode voltage for VSI fed induction motor drive
IJTRD-ISSN: 2394-9333
(UGC)
Design of Permanent Magnet BLDC Motor Drive Applying Bond Graph Theory
IJATEST-ISSN:2456-1126
(UGC)
Study of Effects on Micro Grid Stability with Implementing Droop Control for DFIG based Turbine
IJEST-ISSN : 0975-5462
(UGC)
Comparison Of Vector Control Of Induction Motor Drive Using Conventional Method And Look-Up Tables With 6- And 24- Sectors
JEE-ISSN 1582-4594
(UGC)
Application Of Bond Graph To Permanent Magnet BLDC Drive
ICAESA-(UGC) Application of Bond Graph to Electrical Systems
G PAVANA JYOTHI TMPC ISSN: 0193-4120
(SCOPUS)
Power Factor Correction using Two Switch Buck Boost Converter Fed DC Motor System Using MATLAB
IJETED ISSN 2249-6149
(UGC)
Implementation Of Current-Fed Soft Switched Full-Bridge Boost Dc/Ac/Dc Converter
IJSEAS ISSN: 2395-3470
(UGC)
Implementation Of New PWM Method For Diode Clamped Multilevel Inverter
IJSETR ISSN : 2319-8885
(UGC)
Advanced Control Strategy with Voltage Support Capability for Distributed Generation Inverters under Voltage Sags
IAJER ISSN: 2360-819X
(UGC)
Performance of A Current-Fed Soft Switched Full-Bridge Boost Double Stage Converter Using ZVS PWM
N DEEPTHI IJRTE-ISSN:2277-3878
(SCOPUS)
Constant fulx control N level drive applications for industries
TEST-ISSN:0193-4120
(SCOPUS)
Electric vehicle with novel energy control using solar PV/Fuel cell power SRM Drive
P VISWANATH REDDY IJRTE-ISSN:2277-3878
(SCOPUS)
Design and Simulation Analysis of 12.4KWP grid connected photovoltaic system by using PVSYST software
TEST-ISSN:0193-4120
(SCOPUS)
Analysis of single phase ZSI with various loads
S FARZANA TEST-ISSN:0193-4120
(SCOPUS)
Sun oriented PV frame work by network attched associated with hang control techniques for shunt dynamic force channel applications
IJCRT-ISSN:2320-2882
(UGC)
To provide additional grid voltage regulation as a STATCOM by IUPQC controller
IJITECH-ISSN:2321-8665 Fault diagnosis and fault tolerance control of wind turbine via sliding mode control
Y CHINTU SAGAR TEST-ISSN:0193-4120
(SCOPUS)
Simulation analysis of solar pv array installation on roof top of an acadamic institution by using Helioscope
IJRET-ISSN: 2319-1165
(UGC)
Implementation of Dspace controlled DPWM based induction motor Drive
IJERT-ISSN: 2278-0181
(UGC)
Implementation of Dspace controlled CSVPWM based induction motor Drive
K UDHAYA KUMARI TEST-ISSN:0193-4120
(SCOPUS)
Derivative analysis of schrodinger wave equation based on theory of practicle in a Box
IJRAR-ISSN: 2348-1269
(UGC)
Pwrovskite Solar Cell
WJPPS ISSN : 2278-4357
(UGC)
Synthesis, Charectrization and antimicrobial evaluation of novel compounds of 3-(((1H-BENZO(D)IMIDAZOL-2-YL)METHYL)AMINO)-1-(2,5-DIFLUOROBENZOYL)-4-(2-PHENYLHYDRAZONO)-1H-PYRAZOL-5(4H)-ONE

 

8.FACULTY ACHIVEMENTS:

  • Y Chintu Sagar, Asst. Prof in Department of EEE, has participated in one week FDP on Recent advances in biomedical applications and communication networks organized by Dept. of ECE, GMRIT, Rajam-AP  from 13’th July to 18’th July 2020.
  • V Swomya Sree, Asst. Prof in Department of EEE, has Participated 5-Days FDP in Recent trends in Electrical Engineering during 29’th June to 03’rd July 2020.
  • Deepthi, Asst. Prof in Department of EEE, has Participated 5-Days FDP in Recent trends in Electrical Engineering during 29’th June to 03’rd July 2020.
  • S Farzana, Asst. Prof in Department of EEE, has Participated 5-Days FDP in Recent trends in Electrical Engineering during 29’th June to 03’rd July 2020.
  • Deepthi, Asst. Prof in Department of EEE, has Participated 5-Days FDP in HIL simulation for Power electronics and power systems during 22’nd -26’th June 2020.
  • S Farzana, Asst. Prof in Department of EEE, has Participated 5-Days FDP in HIL simulation for Power electronics and power systems during 22’nd -26’th June 2020.
  • V Sowmya Sree, Asst. Prof in Department of EEE, has Participated 5-Days FDP in HIL simulation for Power electronics and power systems during 22’nd June to 26’th June 2020.
  • Y Chintu Sagar, Asst. Prof in Department of EEE, has participated in one week international FDP on Recent strategies on Micro and smart-grid Technologies  organized by Dept. of EEE, GMRIT, Rajam-AP  from 15’th June to 19’th June 2020.
  • V Sowmya Sree, Asst. Prof in Department of EEE, has participated in a 5 Days FDP on Recent trends in electrical engineering organized by Dept. of EEE VIT-Bhimavaram during 8’th June to 12’th June 2020.
  • Pavana Jyothi, Asst. Prof in Department of EEE, has participated in a short term course Advanced simulation tools for power electronics electromagnetics and power systems from 1’st june to 5’th june 2020, at Vignan institute of engineering for women, vishakapatanam.
  • Rajesh, Asst. Prof in Department of EEE, has secured NPTEL Course Certificate with FDP in the area of Technologies for clean and Renewable Energy Production.
  • Udaya Kumari, Asst Prof in the Department of EEE, has participated FDP on The role of material science in engineering applications perspectives at MGIT, Hyderabad.
  • K Udaya Kumari, Asst Prof in the Department of EEE, has participated in international virtual conference on Recent Advance in biological techniques: methods and applications Organized by Dept. of Biochemistry at Rayalaseema University, Kurnool.
  • S Farzana, Asst. Prof in Department of EEE, has participated in One week FDP on Opportunities and challenges in electronics & allied industries in India post Covid-19 was organized by Dept. of Electronics Engineering is associated with IIC, from 25’th May to 30’th May 2020 at VESIT, Mumbai
  • Rajesh, Asst. Prof in Department of EEE, has participated in One week FDP on Opportunities and challenges in electronics & allied industries in India post Covid-19 was organized by Dept. of Electronics Engineering is associated with IIC, from 25’th May to 30’th May 2020 at VESIT, Mumbai.
  • Deepthi, Asst. Prof in Department of EEE, has participated in One week FDP on Opportunities and challenges in electronics & allied industries in India post Covid-19 was organized by Dept. of Electronics Engineering is associated with IIC, from 25’th May to 30’th May 2020 at VESIT, Mumbai.
  • Y Chintu Sagar, Asst. Prof in Department of EEE, has participated in One week FDP on Opportunities and challenges in electronics & allied industries in India post Covid-19 was organized by Dept. of Electronics Engineering is associated with IIC, from 25’th May to 30’th May 2020 at VESIT, Mumbai.
  • Pavana Jyothi, Asst. Prof in Department of EEE, has participated in a National level one week FDP on power electronics in smart grid electric vehicles which was organized by IEEE from 26’th May to 31’th May2020, at Shantiram Engineering College, Nandyala.
  • Y Chintu Sagar, Asst. Prof in Department of EEE, has participated in a National level one week FDP on power electronics in smart grid electric vehicles which was organized by IEEE from 26’th May to 31’th May2020, at Shantiram Engineering College, Nandyala.
  • Rajesh, Asst. Prof in Department of EEE, has participated in a National level 5 days FDP on OBE-NBA Process which was organized by Internal Quality assurance cell from 15’th May to 19’th May2020, at Narasaraopeta Engineering college, Guntur.
  • Pavana Jyothi, Asst. Prof in Department of EEE, has participated in a National level 5 days FDP on OBE-NBA Process which was organized by Internal Quality assurance cell from 15’th May to 19’th May2020, at Narasaraopeta Engineering college, Guntur.
  • G Pavana Jyothi, Asst. Prof in Department of EEE, has participated in One week FDP on Design and Development of photovoltaic module for PV Generation from 25’th May to 30 May 2020 at Lendi Institute of Tech,JNTUK,Kakinada.
  • Sowmya Sree, Asst. Prof in Department of EEE, has secured NPTEL Course Certificate with FDP in the area of DC Micro Grid.
  • Sowmya Sree, Asst. Prof in Department of EEE, has participated in a one Week Faculty Development Program on Power Converters Design which was organized TEQIP-III from 25th – 29th September 2019,at Department of EEE, JNTUACEA.
  • Deepthi, Asst. Prof in Department of EEE, has Participated 5-Days FDP in Design and Development of Photovoltaic modules for PV Generation.
  • Pavana Jyothi, Asst. Prof in Department of EEE, has got NPTEL Course Certificate with FDP in the area of Introduction to Smart Grid.
  • Pavana Jyothi, Asst. Prof in Department of EEE, has participated in one Week Faculty Development Program on Power Converters Design which was organised TEQIP-III from 25th – 29th September, 2019, at Department of EEE, JNTUACEA.
  • Rajesh, Asst. Prof in Department of EEE, has participated in VLSI circuits analog and digital design perspectives conducted by Dept. of ECE is associated with AMS semiconductors & HCL Technologies at JNTUA.
  • V Sowmya Sree Asst Prof in EEE Department has participated in a STTP on Advanced power electronics control of integrated renewable energy system from 14’th to 19’th October 2019 at RGM college, Nandyal.
  • Deepthi, Asst. Prof in Department of EEE, has secured NPTEL Course Certificate with FDP in the area of Introduction to Smart Grid.
  • Viswanath Reddy, Asst. Prof in Department of EEE, has got NPTEL Course Certificate with FDP in the area of Power Electronics.
  • Viswanath Reddy, Asst. Prof in Department of EEE, has acts as a Resource person to give a seminar talk on 16th September-2019, on the occasion of Science carnival to create awareness among rural students and people which was sponsored by DST-New Delhi.
  • V Sowmya Sree Asst Prof in EEE Department got NPTEL Course Certificate with FDP in the area of Non-Conventional Energy Sources.
  • V Sowmya Sree Asst Prof in EEE Department has participated in a Professional Development Program on “Microgrids & Battery Energy Storage Systems” from 6th May to 11th May 2019 which was organised by IEEE-PES/IAS/PELS Joint Chapter, Hyderabad Section.
  • N Deepthi Asst Prof in EEE Department got NPTEL Course Certificate with FDP in the area of Advances in UHV Transmission and Distribution.
  • P Viswanath Reddy Asst Prof in EEE Department got NPTEL Course Certificate with FDP in the area Non-Conventional Energy Sources.
  1. INDUSTRIAL VISITS:
DATE YEAR PLACE OF VISIT NO OF STUDENTS PARTICIPATED
    29-01-2020 III-EEE IV-EEE SRISAILAM Power Plant, Srisailam, Kurnool Dist.               41
     11-10-2018 III-EEE IV-EEE 750KV/400KV Power grid, Orwakal,  Kurnool Dist.               42
     29-09-2016 III-EEE IV-EEE RTPP Muddanur, Y.S.R.Kadapa.               65

 

  1. INTERNSHIPS:
S.No Name of the Students Roll No Name of the Company Loacation Duration
1 C Naga Rajeswari 152T1A0204 Srisailam Power Plant srisailam, Kurnool Dist 10 Days
N Lawanya 152T1A0220
M Vasatha Kumari 162T5A0204
2 B Anuradha 162T1A0201 SMHR Pvt Ltd Chennai 30 Days
U Hemalatha 162T1A0209
M Priyanka 172T5A0202
R Swetha 172T5A0205
T Vennela 172T5A0206

ASHOKA WOMEN’S ENGINEERING COLLEGE

Department Of Computer Science And Engineering

1.About Department

The Department of Computer Science and Engineering (CSE) was established in the year 1991 with an intake of 60. Over the years, it has grown by leaps & bounds and the current intake is 120. The department also offers M.TechProgram in Computer Science and Engineering with an intake of 18. It has a great potential with well qualified and committed teaching & non-teaching faculty members, headed by Dr.M.Jahir Pasha, the department has been part of various professional bodies like CSI, IUCEE etc

  1. Vision & Mission

VISION

To become a Centre of Excellence in Computer Science and Engineering by imparting high quality education through teaching, training and research.

MISSION

  • The department of Computer Science and Engineering is established to provide undergraduate and graduate education in the field of Computer Science and engineering to students with diverse background in foundations of software and hardware through a broad curriculum and strongly focused on developing advanced knowledge to become future leaders.
  • Create knowledge of advanced concepts, innovative technologies and develop research aptitude for contributing to the needs of industry and society.
  • Develop professional and soft skills for improved knowledge and employability of students.
  • Encourage students to engage in life-long learning to create awareness of the contemporary developments in computer science and engineering to become outstanding professionals.
  • Develop attitude for ethical and social responsibilities in professional practice at regional, National and International levels.

PSOS

  1. To posses competent skills and knowledge for various national and international competitions.
  2. An Ability to get employment in different environments related to software industry.

 

PEOS

  1. Graduates will be prepared to acquire knowledge in skills related to computer science and engineering.
  2. Graduates shall be able to learn current and future trends with social consciousness.
  3. Graduates will be prepared to have foundations in engineering fundamentals to solve computer related problems

FACULTY LIST

Sno Faculty Name Designation
1 Dr.M.K. Shankar Ganesh Professor
2. Dr.C.Chinna Rao Professor
3. Dr.M.Jahir pasha Associate Professor
4 Mr .B .Devananda Rao Associate Professor
5 Mr.K .Kishore Associate Professor
6 Ms S. Neeha Assistant Professor
7 Ms M Manasa Assistant Professor
8 Mr. V.Satish Kumar Assistant Professor
9 Mr.R .Anil Kumar Assistant Professor
10 Mr. Md .Asim Assistant Professor
11 Mrs P Chandrakalavathi Assistant Professor
12 Mrs V Sujatha Assistant Professor
13 Ms D Wasiha Tasneem Assistant Professor
14 Mrs R Sirisha Assistant Professor
15 Mrs S Reshma Assistant Professor
16 Mrs V Rohini Assistant Professor
17 Mrs K Swetha Assistant Professor
18 Ms A Alekya Assistant Professor
19 Mrs D Lakshmi Renuka Devi Assistant Professor
20 Ms G Shaheen Firdous Assistant Professor
21 K Lakshmi Assistant Professor
22 V Munibabu Assistant Professor
23 M Mahaboob peera Assistant Professor
24 S Sabiya Sultana Assistant Professor
25 B Mohana Krishna Assistant Professor
26 M A Bibi Aysha Assistant Professor
27 M Prathap Assistant Professor
28 Ms C Guru Sunanda Assistant Professor

 

STUDENT ACHIEVEMENTS

1. Our Students Seven innovative projects on AWS Alexa were selected for the State Level Programme Cloud Skill Day Nov-2018 organized by APSSDC and Amazon. One among that titled “Image Analysis” Selected as best one for Stage Presentation lead by B Ramasubbama, L Suchitra and B Prathyusha.

2.Three students from our department participated in “Campus Innovation Challenge” organized by Google Developers Codelabs. Student Names: K Lakshmi, B Sushma and Y Maneesha.

ashoka college

3. 20 students of our department selected for Zonal Skill Competition-March 2020 organized by APSSDC and World Skills India.

ashoka college

4. Our Student D Mahalakshmi won zonal Skill Competition 2020 and selected for state level Competition organized by APPSDC and World Skill India.

ashoka college

5. One the Student named K Maneesha for our department participated in WAC 2019 a workshop on Machine Learning hosted by IIT Hyderabad.

6. One of our students K Lakshmi participated and won certificate of merit in 2 days workshop round of industrial visit and training program organized by Hydrolus Technology Pvt. Ltd, Pune hosted by JNTUACEA.

7. Ten students from our department participated in “Technozion-2019” organized by NIT Warangal.

Faculty Achievements

  1. M.Jahir Pasha, D.WasihaTasneem, S Neeha has successfully completed IUCEE INTERNATIONAL ENGINEERING EDUCATOR CERTIFICATION PROGRAM in January 2019.
  2. Anil Kumar received an NPTEL certificate on “The Joy of Computing using Python” for securing ELITE grade sponsored by IIT Madras during July to Oct, 2019.
  3. M.Jahir Pasha received an NPTEL certificate on “Software Project Management” for sponsored by IIT Kharagpur during July to Oct, 2019
  4. Md Asim received an NPTEL certificate on “Software Project Management” sponsored by IIT Kharagpur during July to October, 2019
  5. M.Jahir Pasha received an NPTEL ELITE certificate on “Programming in java ” sponsored by IIT Kharagpur during Jan to April , 2019
  6. M Manasa received an NPTEL certificate on “Database Management System” for sponsored by IIT Madras during Jan to April, 2019
  7. WasihaTasneem acted as Reviewer for Seventh International Conference on Transformations in Engineering Education (ICTIEE 2020).
  8. WasihaTasneem Assisted as IUCEE India Team in grading assignments for the IUCEE Student Leadership Course Spring 2020 organized by EWB India-EPICS.
  9. WasihaTasneemOwned IBM Badge on Machine Learning with Python and Hadoop.
  10. Himaja attended faculty development program on Python Conducted by JNTUA Ananthapuramu.

Students Internships

  1. T .Udaya Swapna from IV CSE joined as intern in Platon Services Pvt LtdBangalore from January 1st 2020 to Febraury 29 2020.
  2. G Bharathi from IV CSE joined as intern in Ensomerge Services Pvt LtdBengaluru, Karnataka from 4th September to 4th November 2019.
  3. Deekshitha, T.Jyothi, K.Mounika, A.Vyshali, K.Thanuja, K.Thulasi joined as interns in Glenwood Systems (Chennai)

FACULTY PUBLICATIONS

International Journals

SNo.

Details of the Journal

Year
1 Sirisha Rajanala and M.Jahir Pasha “Deploying Hate Speech Detection Model Using Flask” Journal of Advanced Research in Dynamical & Control Systems,Vol.12,SpecialIssue-06,2020,DOI:10.5373/JARDCS/V12SP6/SP20201035 (SCOPUS-Elsevier) Retrieved from https://www.jardcs.org/abstract.php?id=5036 2020
 2 M.Jahir Pasha and Sirisha Rajanala, “A Review on Software Reliability Models” Journal of Advanced Research in Dynamical & Control Systems, Vol. 12, Special Issue-06,2020,DOI: 10.5373/JARDCS/V12SP6/SP20201034(SCOPUS-Elsevier) Retrieved from https://www.jardcs.org/abstract.php?id=5035 2020
 3 K.K. Baseer, Neerugatti, V. M. Jahir Pasha, & V. Satish Kumar. Internet of Things: A Product Development Cycle for the Entrepreneurs.  Helix10(02), 155-160. Retrieved from https://helixscientific.pub/index.php/home/article/view/126(WEB OF SCIENCE) 2020
 4 M. Jahir Pasha, V.Satish Kumar, Md.AsimSRGM with TEF for Imperfect Debugging in Software Systems”Test Engineering and Management, Vol. 83 March/April 2020. (SCOPUS-Elsevier) Retrieved from https://www.testmagzine.biz/index.php/testmagzine/article/view/5244 2020
 5 S.Reshma, G.Shaheen Firdous, M.Jahir Pasha, A Review on Software Models”Test Engineering and Management, Vol. 83 March/April 2020. (SCOPUS-Elsevier) Retrieved from http://testmagzine.biz/index.php/testmagzine/article/view/3896 2020
 6 M. Jahir Pasha, M.Manasa, A.AlekyaFeatures Enhancement Based Testing Effort Dependent Learning SRGM”Test Engineering and Management, Vol. 82 January/Febraury 2020. (SCOPUS-Elsevier) Retrieved from http://testmagzine.biz/index.php/testmagzine/article/view/2456 2020
 7 M. Jahir Pasha, K.K.Baseer, T.Satyendra Kumar, Two Dimensional SRGMs for Debugging in Software Systems”Test Engineering and Management, Vol. 82 January/Febraury 2020. (SCOPUS-Elsevier) Retrieved from http://testmagzine.biz/index.php/testmagzine/article/view/2455 2020
 8 VemulaRohini, V. Sujatha, ” IMINE – Index support for itemset mining ” Test Engineering and management, Vol. 83 March/April 2020. ( SCOPUS-Elsevier) Retrieved from http://testmagzine.biz/index.php/testmagzine/article/view/3897 2020
 9 B.Sridevi and L.Raghavendra “A Mathematical Study of COBWEB Model for Economic Demand” Test Engineering and Management, Vol.83 March/April 2020. (SCOPIS-Elsevier) Retrived from http://testmagzine.biz/index.php/testmagzine/article/view/3893 2020
 10 G Veeresh,  U Sujatha, “Applying Mathematical analysis of Fast Fourier Transform to Voltage Controlled Inverter Circuit “,march-April 2020,ISSN:0193-4120 2020
 11 Sirisharajanala, swetha “Analysis of Attrition Prediction using Machine learning “, Test engineering and management,  vol.83 March/April 2020. (SCOPUS- Elsevier) Retrived from https://www.testmagzine.biz/index.php/testmagzine/issue/view/8 2020
 12 K.UdayaKumari and B.Sridevi “Derivative Analysis of Schrodinger Wave Equation based on Theory of Particle in a Box” Test Engineering and Management, Vol.83 March/April 2020. (SCOPIS-Elsevier) Retrived from https://www.testmagzine.biz/index.php/testmagzine/article/view/3903 2020
 13 B. Devanand Rao. D. Lakshmi Renuka Devi, ” certain Investigations on Machine Learning Algorithms for Multiple Applications”, volume 82, January- February 2020,ISSN:0193-4120. Retrived from http://testmagzine.biz/index.php/testmagzine/article/view/2841 2020
 14 V.Satish Kumar, R.Anil Kumar “Geospatial Challenges in Big Data using Cloud Computing” Test Engineering and Management, Vol. 83 March/April 2020. (SCOPUS-Elsevier) Retrived from https://www.testmagzine.biz/index.php/testmagzine/article/view/3895 2020
 15 R.Anil Kumar “Energy Efficient Routing to Enhance Network Lifetime in Wireless Sensor Network:AReview”, ISSN: – 4120,Volume 82, January/February 2020, Retrived from https://www.testmagzine.biz 2020
 16 B.Mahesh, K.Pavan Kumar, M.Jahir Pasha, “AES Cryptograph for Secure Cloud Storage”International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-8, Issue-6S3, September 2019(SCOPUS-Elsevier) Retrieved from https://www.ijeat.org/wp-content/uploads/papers/v8i6S3/F12430986S319.pdf 2019
 17 ShaikReshma,S.Neeha”A Novel Adaptive Data Collection Method for WSN”,JASC journal ,Volume VI,Issue I,January-2019.DOI:16.10089/JASC Retrieved from http://j-asc.com 2019
 18 M.Manasa, P.Chandrakalavathi” Data Aggregation in Wireless Sensor Networks”, JASC journal, February, 2019 2019
 19 Z.Himaja,“Netwrork Lifetime In Wireless Sensor Networks”, IJR Journal, February, 2019 2019
 20 Z.Himaja, M.Manasa, P.Chandrakalavathi “Routing ForNetworks”, IJR Journal, February, 2019 2019
 21 U.Sujatha,Y.Aparna,G.Veeresh, B.Sridevi, L.Raghavendra “DIFFERENTIATION AND INTEGRATION” IJRAR, Vol.6 Issue 2 June 2019 Paper ID: IJRAR19K6231 Retrieved from https://www.recentscientific.com/sites/default/files/14871-A-2019.pdf 2019
 22 U Sujatha, G veeresh, Y Aparna”Hypothesis and Applications of Numerical Analysis”,Volume 4/issue10 ,October -2019 Retrieved from www.ijsdr.org/editor@ijsdr.org 2019
 23 R.Anil Kumar,”Machine learning based traffic signal control”, IJR a UGC recognized journal Volume 8,issue 2,February-2019. 2019
 24 R.Anil Kumar,”A survey on Machine learning”, SSRG, Volume 9,issue 1, ISSN:2249-2615,February-2019 2019
 25 Shaik Reshma,”An efficient privacy presenting query solution for smart phones”, IJETMS journal,Volume-I, Issue -1,August-2017. Retrieved from www.ijetms.in 2017
 26 ShaikReshma,”Attribute Based Encryption to Data for storage in Cloud”,International journal of Trend in Research and Development, ISSN:2394-9333,Special Issue,December-2017 2017
 27 Shaik Reshma,”An Exclusive faulty node detection in mobile wireless network”,IJRjournal,Volume –IV,Issue -13,October-2017,ISSN:2348-6848 2017

LAB DETAILS

Computer Science and Engineering Department helps its students to enrich their abilities by encouraging critical thinking through programming skills. The department has well equipped laboratories to train students in order to advance their theoretical knowledge and sound practices of the profession. Students are encouraged to undertake projects in various areas such as Cloud Computing, Big Data using wireless networks, etc.

Central Computer Center (CCC):

The Central Computer Centre has been established to provide opportunity to enhance the learning of students through client’s computers which are connected to central high-end server. This lab is mainly dedicated to organize hands-on workshops and online trainings on various emerging technologies for the students of all the disciplines of engineering. This lab is equipped with OH projector with public addressing system, thin clients connected to main server.

Advance English Communication Skills Lab:

Equipped with latest configured DESKTOP PC’s with licensed software that enables the students to program in C, C++, and JAVA etc. It supports Client-Server.

Simulation Lab:

The systems are loaded with required software to practice regular lab sessions and for database related projects.

Computer Lab-3:

Equipped with latest processor systems that enables the students to model systems using Rational Rose and to build Data warehouses using Informatics the lab is equipped with Systems installed with os that supports Open Source Tools for web designing and Socket Programming. The systems are also installed with PHP, WEKA, R and domain related application software to facilitate the students in completing Preliminary work and UG Projects.

Computer Lab-4:

The lab is equipped with Desktop PC’s with licensed System and application Software development. This lab is utilized by M.Tech. Students for their project works and also to support ongoing industrial technicalities.

R&D Lab:

Equipped with 37 Laptops. This lab is utilized by students, research scholars, and faculty who work on challenging problems.IBM’s Blue Mix, Big Insights is also added as an additional advantage to carry research on Cloud and Big Data technologies. Equipped with  LCD projector.

INDUSTRIAL VISIT

VISIT TO IISC, BANGLORE

A one-day Industrial Visit toIISC. Bangalore was organized by the Department of Computer Science and Engineering, on 8th March 2015. 40 students visited the campus, accompanied by four faculty members.

In the visit, students had a visual exposure about Aerospace Lab facilities available in IISC and various ongoing projects.The students were expressed that this program was highly useful to them to understand the Research areas of IISC and as well as to gain the knowledge on current trends in aerospace engineering.

VISIT TO ISRO, SRIHARIKOTA

An industrial visit to SDSC-SHAR (ISRO), Sriharikota has been organized by Department of Computer Science and Engineering of KVSW for 30 students of B.Tech III & IV year on 8th February, 2018 who were accompanied by three faculty members.

The objective of the visit was to provide a Technical Exposure to the students about Space Technology and advancements in Technology. The visit not only provided a good insight into the quality of research happening in the area of space technology but also gave great exposure to the students about the future career prospects and areas of research in applied sciences.

VISIT TO INFOSYS CAMPUS, HYDERABAD

An Industrial visit to “INFOSYS”, HYDSEZ, Pocharam Village, Hyderabad, Telangana 500088was organized by the Computer Science and Engineering Department of KVSW on 21stMarch 2018. Total 38CSE students and four faculties visited to INFOSYS Campus to interact with the Software Industry and also to understand current market scenarios, latest mostdemanding technologies & criteria for selection etc. In this visit students were very eagerly waited forlistening the industrial higher authorities.

TheTechnical Head of INFOSYS conducted very informative session for the students.Also he motivated to the students to select their domain and area of interest. He also guided the studentsto select the areas like web development, mobile application development & software testing etc. and itsimportance in the current software market.

It was an informative, interesting and asuccessful visit. As students of CSE, they understand a live Softwareapplications and importance of technology selection, etc. We express our thanks to the TechnicalHead and all team members of INFOSYS who spent their valuable time for us.

ASHOKA WOMEN’S ENGINEERING COLLEGE: KURNOOL

DEPARTMENT OF CIVIL ENGINEERING

ABOUT THE CIVIL DEPARTMENT:

The department of civil engineering was started in the academic year 2013- 2014 with an intake of 60 and main aim is for promoting high quality educational knowledge in the field of civil engineering. The academic activities of the department emphasis deep understanding of fundamental principles, development of creative ability to handle the challenges of civil engineering and the analytical ability to solve the problems which are inter-disciplinary in nature.

The department currently offers bachelor of engineering (B.E) degree program in civil engineering following the JNTUA university curriculum, Ananthapuramu. The curriculum broadly covers the engineering subjects of related fields such as surveying, building materials and constructions, soil mechanics and foundation and so on. Every year technical symposium AAVISKAR is organized for students to explore their technical knowledge and interact with other college students and departments. Every year department magazine “Civil Engineering and Construction Review” will be published half yearly once to develop and improve student’s technical skills and publishing skills. Students are encouraged continuously to participate in various training programs, Industrial visits, site camps for improvement in their technical knowledge.

DEPARMENT OF CIVIL ENGINEERING VISION & MISSION

DEPARTMENT VISION:

            To acehive excellent standards of quality education in civil engineering by keeping pace with rapidly changing technology and to create high standrads in civil engineering with capabilities of accepting new challenges.

DEPARTMENT MISSION:

  • To create competent professionals who are trained in design and implementation for civil engineering system.
  • To serve society and nation for providing professional leadership.
  • To impart quality and value based education to raise satisfaction of all stake holders.

PROGRAM EDUCATIONAL OBJECTIVES (PEO’s)

PEO 1:      Impart Application of Mathematical, physical, geotechnical, environmental,
hydrological and structural knowledge for the formulation and framing solution in
civil engineering.

PEO 2:      To prepare graduates with a solid basic foundation in engineering and technology for a    successful career in civil engineering.

PEO 3:      To equip graduates with integrity and ethical values so that they become responsible engineers.

LAB NAME & ITS DESCRIPTON

S.NO LAB NAME DESCRIPTION
1 ENGINEERING WORKSHOP Knowledge on various workshop hand and power tools , Utilization in different manufacturing trades such as carpentry, fitting, house wiring, sheet metal forming, foundry, overflow of metal cutting processes, plumbing and welding through live demonstrations.
2 CIVIL ENGINEERING WORKSHOP The Department has a well-equipped Civil Engineering Workshop. The Workshop is intended to familiarize the fundamental experiments in Civil Engineering for all branches. For civil engineering students this lab is an introductory workshop whereas for other branches the lab facilitates the ideas about basic civil engineering in their day to day life.
3 ENGINEERING GRAPHICS LAB Engineering Graphics is a two dimensional representation of three dimensional objects. In general, it provides necessary information about the shape, size, surface quality, material, manufacturing process, etc., of the object. It is the graphic language from which a trained person can visualize objects. Student’s ability to perform basic sketching techniques will improve.
4 APPLIED MECHANICS LAB Students have the opportunity to use experimental apparatus and compare results against that of accepted theory, developing and enhancing their knowledge of important scientific concepts. Various applications of strain gauges such as diaphragm, thick/ thin cylinders, combined bending & torsion, single/ multi plane balancing exercises can also be conducted. These are very useful for the understanding of vector diagrams.
5 SURVEYING LAB Exercises On Chain Surveying, Compass Surveying, Plane Table Surveying, Auto Leveling, Theodolite Surveying, Total Station Surveying, Area By Planimeter.
6 STRENGTH OF MATERIALS LAB Demonstrating the basic principles in the area of strength and mechanics of materials and structural analysis to the undergraduate students through a series of experiments is the objective of the strength of materials lab.  Measuring the properties of the materials such as impact strength, tensile strength, compressive strength, hardness, ductility are conducted in the lab.
7 HYDRAULICS & HYDRAULIC MACHINERY LAB Calibration of Flow Meters, Verification Of Bernoulli’s Equation, Performance of Turbines and Pumps, Losses Through Pipes.
8 ENGINEERING GEOLOGY Study of physical properties and identification of minerals and rocks, Rock forming minerals, Igneous rocks , Sedimentary rocks, Metamorphic rocks, Geological maps, Problems on Structural geology
9 GEOTECHNICAL ENGINEERING LAB Experiments on the determination of index properties index and engineering properties of soil
10 CONCRETE TECHNOLOGY Testing of cement and sand, Testing of fresh and hardened concrete mixes, Non-Destructive tests on concrete.
11 TRANSPORTATION ENGINEERING LAB The Transportation Engineering lab has equipment required to conduct all standardized tests to assess quality of highway materials, pavement evaluation and traffic engineering studies. Experiments are conducted in pre-and post-construction phases of highways. The Transportation Engineering lab does quality assurance and quality control tests for the Roads, Traffic engineering surveys are also conducted in the lab and students learn to conduct spot speed studies, volume counts, and conflict studies for preparing road improvement plans to enhance road safety.
12 ENVIRONMENTAL ENGINEERING LAB Experimental analysis of physical, chemical and biological parameters of water and waste water.
13 CADD LAB The CADD lab has been created exclusively to cater training of all students in the latest CAD software.

FACULTY LIST

S.NO NAME OF THE FACULTY DESIGNATION QUALIFICATION
1. Ms. G UMAMAHESWARI  ASSISTANT PROFESSOR M.TECH
2. Ms. S NAZMA ASSISTANT PROFESSOR M.TECH
3. Ms. S BRAMARAMBIKA ASSISTANT PROFESSOR M.TECH
4. Mr. P REHAMATHULA ASSISTANT PROFESSOR M.TECH
5. Mrs. K VIJAYA LAKSHMI ASSISTANT PROFESSOR (ME) M.TECH

STUDENTS ACHIVEMENTS

During Year 2020:

  • Lakshmi Prasanna of III CE has got NPTEL certificate in Electronic Waste Management in Jan-Feb 2020
  • Vasundara of III CE has got NPTEL  certificate in Electronic Waste Management in Jan-Feb 2020
  • Sharmila Teja of III CE has got NPTEL certificate in Electronic Waste Management in Jan-Feb 2020
  • Vinitha of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad And Shell Pro Technology has Design Engineer
  • B Divya Bharathi of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad and Survey Engineering
  • B Kalyani of IV CE selected for SHELLPro Technology as Design Engineer
  • B Jaya Sree of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad and SHELLPro Technology as Design Engineer.
  • CM Sri Varshitha of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad.
  • G Pallavi of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad.
  • M Sushma Reddy of IV CE selected for SHELL Pro Technology as Design Engineer Vijayawada
  • M Aruna of IV CE selected for SHELLPro Technology as Design Engineer Vijayawada. Swapna of IV CE selected for SHELLPro Technology as Design Engineer Vijayawada.
  • T Sushmanjali Reddy of IV CE selected for SHELLPro Technology as Design Engineer Vijayawada.
  • U Sandya Rani of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad.
  • V Harshitha of IV CE selected for SOILSOL Projects as Surveyor Engineer, Hyderabad.
  • J Pranaya of IV CE selected for SHELLPro Technology as Design Engineer Vijayawada and Village Surveyor, A.P.Grama /Ward Sachivalayam.
  • .Mamatha of IV CE selected for Village Surveyor, A.P.Grama /Ward Sachivalayam.
  • MarekkaGari Netravathi of IV CE selected for Village Surveyor, A.P. Grama/Ward Sachivalayam.
  • Madhavi of IV CE selected for SHELLPro Technology as Design Engineer Vijayawada.
  • Ramachandrappagari Nagamani of IV CE selected for Village Surveyor, A.P. Grama/Ward Sachivalayam.
  • T Lavanya of IV CE selected for Village Surveyor, A.P. Grama/Ward Sachivalayam.

During Year 2019:

  • Renuka of IV CE selected for Village Surveyor ,A.P. Grama/Ward Sachivalayam
  • Jayanthi IV CE selected for Village Surveyor, A.P. Grama/Ward Sachivalayam.
  • Reshma IV CE selected for Village Surveyor ,A.P. Grama/Ward Sachivalayam.
  • D K Tejaswini Bai of IV CE selected for System Engineer in WIPRO, Bangalore.
  • Chaturya of IV CE selected for as Operator KYUNGSHIN Industrial Motherson Pvt. Ltd Chennai.
  • Nomeswari of IV CE selected for Village Surveyor, A.P. Grama/Ward Sachivalayam.
  • Sravani of IV CE selected for Village Surveyor ,A.P. Grama/Ward Sachivalayam
  • Jhansi Akshitha of IV CE selected for Sri City Companies, Chittoor.
  • Sushma Saranya of  IV CE selected for as cad designer, SAI Associate, Kurnool.
  • Siva Sai Lekha of IV CE selected for Town Planning in the department of Municipal Corporation, diploma apprentice under apprentices act, 1961 posted to Guntur Municipal Corporation.
  • Krishnaveni of IV CE selected for Town Planning in the department of Municipal Corporation, diploma apprentice under apprentices act, 1961 posted to Guntur Municipal Corporation.
  • Krupa of III CE certified as runners in shuttle played at G. Pulla Reddy Engineering College.
  • Rani of II CE certified as  runners shuttle played at G. Pulla Reddy Engineering College.
  • Krupa III CE selected for runners in volley ball played at G. Pulla Reddy Engineering College.
  • Pranaya of III CE has got NPTEL certificate in Design of Reinforced Concrete Structures in Jul- Oct 2019.
  • Kalyani of III CE has got NPTEL certificate in Geotechnical Engineering laboratory Structures in Jul- Aug2019.

During Year 2018:

  • Swathi of IV CE selected for AIM institute as Trainee Engineer.
  • Chaitanya Bai of IV CE selected for AIM institute as Trainee Engineer.
  • A Sharoon Padma of IV CE selected for Assistant Engineer (AE).
  • Hari Chandana Raj of IV CE selected for SRI Info Tech as Auto-Cad Drafting Hyderabad.
  • Narmada IV CE selected for GEO-VISTA Pvt. Ltd as Junior GIS Engineer.
  • Bhagyamma of IV CE selected for VRGS associate as Auto cad drafting designer, Secunderabad.

FACULTY PUBLICATION LIST

The following is the list of faculty publications over the years.

YEAR: 2019-20

S NAZMA, Introduction To Quarry Dust As Partial Replacement Of Material To Scarce Building Material, International journal of engineering research & technology (INIJERT), Volume 9, Issue 5, May-2020.  (UGC)

K VIJAYA LAKSHMI, Mini Kart Design with Bike Engine. TEST Engineering & Management, March-April 2020, ISSN: 0193-4120, Volume 83, Page Number: 25762-25772. (SCOPUS)

P RAHAMATHULLA, Experimental Investigation on Soil Stabilization Process with the Help of Industrial Waste Materials. TEST Engineering & Management, March-April 2020, ISSN: 0193-4120, Volume 83, Page Number: 1970-1975. (SCOPUS)

S NAZMA, Special Concrete By Using Quarry Dust As Partial Replacement Of Cement. TEST Engineering & Management, March-April 2020, ISSN: 0193-4120, Volume 83, Page Number:2020-2025. (SCOPUS)

SUTHARI BRAMARAMBIKA, Experimental Study on Toughness Property of Fiber Reinforced Self Compacting Concrete (FRSCC). TEST Engineering & Management, March-April 2020, ISSN: 0193-4120, Volume 83, Page Number: 1956-1963. (SCOPUS)

G UMA MAHESWARI, Experimental Study on Toughness Property of Fiber Reinforced Self Compacting Concrete (FRSCC). TEST Engineering & Management, March-April 2020, ISSN: 0193-4120, Volume 83, Page Number: 1956-1963. (SCOPUS) 

YEAR: 2018-19

S NAZMA, Veracity Research In Scientific Computation & Engineering Trends. International Conference  organized by V. R. S. College of Engineering, Arasur-607 107, Villupuram District, Tamil Nadu, India on 23 March 2019. (CONFERENCE)

YEAR: 2017-18

S NAZMA, Comparison Of Design Results Of A Structure Between E-Tab & Sap2000 Software in e-Journal. International journal For Scientific Research and Development, Volume 5, Issue 11, Jan-2018. (UGC)

G UMAMAHESWARI, MODELLING OF THREE STAR HOTEL IN REVIT. International Journal of Science, Engineering and Technology Research, August 2017, ISSN: 2278 – 7798, Volume 6, Issue 8, Page Number: 1234-1240.  (UGC)

G UMAMAHESWARI, PAPERCRETE. International Journal of Science, Engineering and Technology Research (IJSETR), August 2017, ISSN: 2278 – 7798, Volume 6, Issue 8, Page Number: 1289-1297. (UGC)

FACULTY ACHIEVEMENTS LIST

The following is the list of faculty achievements over the years.

DURING YEAR 2020:

  • K VIJAYA LAKSHMI received certificate in RECENT TRENDS IN MECHATRONICS & AUTOMATION conducted by NBN SINHGAD SCHOOL OF ENGINEERING, PUNE at National Level on 30 June 2020 for 5 days.
  • SUTHARI BRAMARAMBIKA received certificate in SMART MATERIALS IN CONSTRUCTION conducted by VARDHAMAN COLLEGE OF ENGINEERING, HYDERABAD on 25 JUNE 2020 for 6 days.
  • K VIJAYA LAKSHMI received certificate in EFFECTIVE RESEARCH WRITING USING LATEX conducted by PRAGATI ENGINEERING COLLEGE under IIT BOMBAY on 22 June 2020 for 6 days.
  • K VIJAYA LAKSHMI received certificate in MICROSOFT POWER BI conducted by APSSDC Skill AP on 15 June 2020 for 5 days.
  • SUTHARI BRAMARAMBIKA received certificate in MICROSOFT POWER BI conducted by APSSDC Skill AP on 15 June 2020 for 5days.
  • SUTHARI BRAMARAMBIKA received certificate in ADVANCES IN SUSTAINABLE CONSTRUCTION ENGINEERING (ASCE) conducted by KAKATIYA INSTITUTE OF TECHNOLOGY & SCIENCE, WARANGAL, TELANGANA on 13 JUNE 2020 for 6 days.
  • K VIJAYA LAKSHMI received S+ GRADE certificate on ONE WEEK NATIONAL LEVEL ONLINE SHORT TIME TRAINING PROGRAM on MATLAB for All conducted by SRI M VISVESVARAYA INSTITUTE OF TECHNOLOGY, Bangalore on  4 June 2020.
  • SUTHARI BRAMARAMBIKA received certificate in ADVANCED PRACTICES IN CIVIL ENGINEERING conducted by VIGNAN INSTITUTE OF TECHNOLOGY AND SCIENCE, HYDERABAD on 04 June 2020 For 5 Days.
  • K VIJAYA LAKSHMI received certificate in SOLID EDGE conducted by APSSDC Skill AP on 1 June 2020 for 13 days.
  • K VIJAYA LAKSHMI received Professional membership from Institute for Engineering Research and Publication (IFERP) for a period of 31 May 2020 – 31 December 2020.
  • SUTHARI BRAMARAMBIKA received Professional membership from Institute for Engineering Research and Publication (IFERP) for a period of 31 May 2020 – 31 December 2020.
  • S NAZMA received certificate in INTERNATIONAL ONLINE CAPACITY BUILDING PROGRAM ON CIVIL ENGINEERING PRACTICES conducted by ANNACHARYA INSTITUTE OF TECHNOLOGY AND SCIENCE, TIRUPATI on 28 May 2020 for 2 days.
  • G UMAMAHESWARI received her ONLINE SHORT TERM TRAINING PROGRAM (STTP) in INNOVATION AND UPGRADATION IN INFRASTRUCTURAL TECHNOLOGY Organized by the Dept Of Civil Engineering, TEC IN ASSOCIATION WITH ASTR on 27 May To 2 June 2020.
  • S NAZMA received certificate in GLOBAL TRENDS IN CIVIL AND INFRASTRUCTURAL ENGINEERING conducted by INSTITUTE OF AERONAUTICAL ENGINEERING, TELANGANA on 26 May 2020 for 5 days.
  • S NAZMA received certificate in BUILDING DRAFTING BY USING AUTO CAD conducted by APSSDC Skills development centre on 20 May 2020 for 13 days.
  • S NAZMA Received certificate in FOUNDATION ENGINEERING conducted by AICTE- UGC-HUMAN RESOURCE DEVELOPMENT CENTER, JNTUH on 03 February 2020 for 5 days.

DURING YEAR 2019:

  • S NAZMA received certificate in DESIGN OF REINFORCED CINCRETE STRUCTURES conducted by NPTEL on July- October 2019 for 12 weeks program.
  • G UMAMAHESWARI received GEOSYNTHETICS TESTING LABORATORY certificate conducted by NPTEL during July-October 2019.
  • G UMAMAHESWARI has been RATIFIED under JNTUA during March 2019.

INDUSTRIAL VISIT

S.NO     DATE YEAR / SEM                   PLACE OF VISIT TOTAL STUDENTS PARTICIPATED
1 22-01-2020 to

25-01-2020

III-II CE SURVEY Camp to Tadakanapalli(v), Kurnool                60
2 31-08-2019 IV-I YEAR DUPADU RAILWAY STATION, Kurnool                28
3 08-04-2019 III-II CE SRISAILAM DAM, Srisailam                43
4  18-02-2019 III-II CE WAL-MART in   Birla Compound, Kurnool                25
5 18-02-2019 III-II CE High –rise building in N.T.R Nagar near Outer ring road, Kurnool                25
6 17-12-2018 to

22-12-2018

III-II CE

II-II CE

SURVEY Camp to Tadakanapalli(v), Kurnool                38
7 29-09-2018 III-I CE

IV-I CE

SRISAILAM DAM, Srisailam                55
8 04-08-2018 III-I CE

IV-I CE

Skill Development Program on TOTAL STATION                34
9 07-10-2015 III-I CE SUNKESULA DAM, Kurnool               34